M. Yan, L. Rampino, and G. Caruso. “User Acceptance of Autonomous Vehicles: Review and Perspectives on the Role of the Human-Machine Interfaces.” Computer-Aided Design and Applications, 2023, 987–1004. https://doi.org/10.14733/cadaps.2023.987-1004.

M. Yan, Z. Lin, P. Lu, M. Wang, L. Rampino, and G. Caruso. “Speculative Exploration on Future Sustainable Human-Machine Interface Design in Automated Shuttle Buses.” Sustainability 15, no. 6 (2023): 5497. https://doi.org/10.3390/su15065497.

Y. Shi, M. Boffi, B. E. A. Piga, L. Mussone, and G. Caruso. “Perception of Driving Simulations: Can the Level of Detail of Virtual Scenarios Affect the Driver’s Behavior and Emotions?” IEEE Transactions on Vehicular Technology 71, no. 4 (2022): 3429–42. https://doi.org/10.1109/TVT.2022.3152980.

G. Caruso, M. K. Yousefi, and L. Mussone. “From Human to Autonomous Driving: A Method to Identify and Draw Up the Driving Behaviour of Connected Autonomous Vehicles.” Vehicles 4, no. 4 (2022). https://doi.org/10.3390/vehicles4040075.

F. Fossa, S. Arrigoni, G. Caruso, H. H. Cholakkal, P. Dahal, M. Matteucci, and F. Cheli. “Operationalizing the Ethics of Connected and Automated Vehicles.” International Journal of Technoethics 13, no. 1 (2022): 1–20. https://doi.org/10.4018/IJT.291553.

F. Morosi, I. Carli, G. Caruso, G. Cascini, E. Dekoninck, and J. F. Boujut. “Exploring Tablet Interfaces for Product Appearance Authoring in Spatial Augmented Reality.” International Journal of Human-Computer Studies 156, no. September (2021): 102719. https://doi.org/10.1016/j.ijhcs.2021.102719.

F. Morosi, and G. Caruso. “Configuring a VR Simulator for the Evaluation of Advanced Human–Machine Interfaces for Hydraulic Excavators.” Virtual Reality 2021 1 (2021): 1–16. https://doi.org/10.1007/S10055-021-00598-Z.

L. Ulrich, F. Nonis, E. Vezzetti, S. Moos, G. Caruso, Y. Shi, and F. Marcolin. “Can Adas Distract Driver’s Attention? An Rgb-d Camera and Deep Learning-Based Analysis.” Applied Sciences (Switzerland) 11, no. 24 (2021). https://doi.org/10.3390/app112411587.

L. L. Micoli, G. Caruso, and G. Guidi. “Design of Digital Interaction for Complex Museum Collections.” Multimodal Technologies and Interaction 4, no. 2 (2020). https://doi.org/10.3390/mti4020031.

Y. Shi, M. Bordegoni, and G. Caruso. “User Studies by Driving Simulators in the Era of Automated Vehicle.” Computer-Aided Design and Applications 18, no. 1 (2020): 211–26. https://doi.org/10.14733/cadaps.2021.211-226.

F. Morosi, and G. Caruso. “High-Fidelity Rendering of Physical Colour References for Projected-Based Spatial Augmented Reality Design Applications.” Computer-Aided Design and Applications 18, no. 2 (2020): 343–56. https://doi.org/10.14733/cadaps.2021.343-356.

G. Cascini, J. O’Hare, E. Dekoninck, N. Becattini, J. F. Boujut, F. Ben Guefrache, I. Carli, G. Caruso, L. Giunta, and F. Morosi. “Exploring the Use of AR Technology for Co-Creative Product and Packaging Design.” Computers in Industry 123 (2020). https://doi.org/10.1016/j.compind.2020.103308.

Y. Shi, N. Azzolin, A. Picardi, T. Zhu, M. Bordegoni, and G. Caruso. “A Virtual Reality-Based Platform to Validate HMI Design for Increasing User’s Trust in Autonomous Vehicle.” Computer-Aided Design and Applications 18, no. 3 (2020): 502–18. https://doi.org/10.14733/cadaps.2021.502-518.

F. Morosi, M. Rossoni, and G. Caruso. “Coordinated Control Paradigm for Hydraulic Excavator with Haptic Device.” Automation in Construction 105 (2019): 102848. https://doi.org/10.1016/j.autcon.2019.102848.

D. Ruscio, G. Caruso, L. Mussone, and M. Bordegoni. “Eco-Driving for the First Time: The Implications of Advanced Assisting Technologies in Supporting pro-Environmental Changes.” International Journal of Industrial Ergonomics 64, no. March (2018): 134–42. https://doi.org/10.1016/j.ergon.2018.01.009.

D. Ariansyah, G. Caruso, D. Ruscio, and M. Bordegoni. “Analysis of Autonomic Indexes on Drivers’ Workload to Assess the Effect of Visual ADAS on User Experience and Driving Performance in Different Driving Conditions.” Journal of Computing and Information Science in Engineering 18, no. 3 (2018): 031007-1–11. https://doi.org/10.1115/1.4039313.

A. Mansutti, M. Covarrubias Rodriguez, G. Caruso, M. Bordegoni, and U. Cugini. “Visuo-Tactile System for 3D Digital Models Rendering.” Computer-Aided Design and Applications 13, no. 2 (2016): 236–45. https://doi.org/10.1080/16864360.2015.1084196.

M. Bordegoni, M. Covarrubias, G. Caruso, and U. Cugini. “Freehand Gesture and Tactile Interaction for Shape Design.” Journal of Computing and Information Science in Engineering 16, no. 4 (2016): 1–7. https://doi.org/10.1115/1.4033230.

G. Caruso, S. Camere, and M. Bordegoni. “System Based on Abstract Prototyping and Motion Capture to Support Car Interior Design.” Computer-Aided Design and Applications 13, no. 2 (2015): 228–35. https://doi.org/10.1080/16864360.2015.1084194.

J. Akyeampong, S. Udoka, G. Caruso, and M. Bordegoni. “Evaluation of Hydraulic Excavator Human-Machine Interface Concepts Using NASA TLX.” International Journal of Industrial Ergonomics 44, no. 3 (2014): 374–82. https://doi.org/10.1016/j.ergon.2013.12.002.

G. Caruso, G. M. Re, M. Carulli, and M. Bordegoni. “Novel Augmented Reality System for Contract Design Sector.” Computer-Aided Design and Applications 11, no. 4 (2014): 389–98. https://doi.org/10.1080/16864360.2014.881181.

G. Caruso, M. Carulli, and M. Bordegoni. “Augmented Reality System for the Visualization and Interaction with 3D Digital Models in a Wide Environment.” Computer-Aided Design and Applications 12, no. 1 (2014): 86–95. https://doi.org/10.1080/16864360.2014.949579.

F. Ferrise, G. Caruso, and M. Bordegoni. “Multimodal Training and Tele-Assistance Systems for the Maintenance of Industrial Products.” Virtual and Physical Prototyping 8, no. 2 (2013): 113–26. https://doi.org/10.1080/17452759.2013.798764.

M. Bordegoni, and G. Caruso. “Mixed Reality Distributed Platform for Collaborative Design Review of Automotive Interiors.” Virtual and Physical Prototyping 7, no. 4 (2012): 243–59. https://doi.org/10.1080/17452759.2012.721605.

G. Caruso. “Mixed Reality System for Ergonomic Assessment of Driver’s Seat.” The International Journal of Virtual Reality 10, no. 2 (2011): 69–79. http://ijvr.org/web/search/singleArticle/77.

M. Bordegoni, U. Cugini, G. Caruso, and S. Polistina. “Mixed Prototyping for Product Assessment: A Reference Framework.” International Journal on Interactive Design and Manufacturing (IJIDeM) 3, no. 3 (2009): 177–87. https://doi.org/10.1007/s12008-009-0073-9.

Micoli, L. L., Guidi G., and Caruso G. “A Method for the Automatic Generation of 3D Models Based on Artificial Intelligence,” 149–53, 2023. https://doi.org/10.14733/cadconfP.2023.149-153.

Ariansyah, D., Pardamean B., and Caruso G. “The Effect of Visual Advanced Driver Assistance Systems on a Following Human Driver in a Mixed-Traffic Condition.” In Procedia Computer Science, 216:221–29, 2023. https://doi.org/10.1016/j.procs.2022.12.130.

Yan M., Rampino L., and Caruso G. “An Exploration of Barrier-Free Driving Education Assistance System Based on HCI Technology Under the Inclusive Design Concept.” In Advanced Theory and Applications of Engineering Systems Under the Framework of Industry 4.0, 97–111. Singapore: Springer Nature Singapore, 2023. https://doi.org/10.1007/978-981-19-9825-6_8.

Morosi, F., Caruso G., and Cascini G. “Spatial Augmented Reality as a Visualization Support for Engineering Analysis,” 103–15. Springer, Cham, 2022. https://doi.org/10.1007/978-3-030-91234-5_10.

Yan, M., Rampino L., and Caruso G. “Proceedings of CAD’22, Beijing, China, July 11-13, 2022, 282-286 © 2022 CAD Solutions, LLC, Http://Www.Cad-Conference.Net Title: Perspectives on User’s Acceptance of Human-Machine Interface in Autonomous Vehicles.” In CAD’22 Proceedings, 282–86. CAD Solutions LLC, 2022. https://doi.org/10.14733/cadconfP.2022.282-286.

Boffi, M., Piga B. E. A., Mussone L., and Caruso G. “Investigating Objective and Perceived Safety in Road Mobility.” In Transportation Research Procedia, 60:600–607. Elsevier, 2022. https://doi.org/10.1016/J.TRPRO.2021.12.077.

Yan, M., Rampino L., Zhao H., and Caruso G. “Implications of Human-Machine Interface for Inclusive Shared Autonomous Vehicles.” In Human Factors in Transportation, Vol. 60, 2022. https://doi.org/10.54941/ahfe1002488.

Piñones, E., Cascini G., Caruso G., and Morosi F. “Overcoming Augmented Reality Adoption Barriers in Design: A Mixed Prototyping Content Authoring Tool Supported by Computer Vision.” In Proceedings of the Design Society, 1:2359–68, 2021. https://doi.org/10.1017/pds.2021.497.

Bellani, P., Carulli M., and Caruso G. “Gestural Interfaces to Support the Sketching Activities of Designers.” In Volume 2: 41st Computers and Information in Engineering Conference (CIE). American Society of Mechanical Engineers, 2021. https://doi.org/10.1115/DETC2021-71233.

Bruno, F., Ceriani A., Zhan Z., Caruso G., and Del Mastro A. “Virtual Reality to Simulate an Inflatable Modular Hydroponics Greenhouse on Mars.” In Volume 9: 40th Computers and Information in Engineering Conference (CIE). American Society of Mechanical Engineers, 2020. https://doi.org/10.1115/DETC2020-22326.

Shi, Y., Azzolin N., Picardi A., Zhu T., Bordegoni M., and Caruso G. “Validating HMI Design for Increasing User’s Trust in Autonomous Vehicle.” In CAD’20, 237–41. CAD Solutions LLC, 2020. https://doi.org/10.14733/cadconfP.2020.237-241.

Shi, Y., Bordegoni M., and Caruso G. “User Studies in Laboratory Driving Simulations.” In CAD’20, 242–47. CAD Solutions LLC, 2020. https://doi.org/10.14733/cadconfP.2020.242-247.

Aruanno, B., Caruso G., Rossini M., Molteni F., Espinoza M. C. E., and Covarrubias R. M. “Virtual and Augmented Reality Platform for Cognitive Tele-Rehabilitation Based System,” Vol. 12376 LNCS, 2020. https://doi.org/10.1007/978-3-030-58796-3_17.

Piga, B., Caruso G., Ferraioli A., and Mussone L. “Modeling Virtual Road Scenarios for Driving Simulators: A Comparison of 3D Models with Different Level of Details.” In 42th International Conference of Representation Disciplines Teachers, 792–802, 2020. https://doi.org/10.3280/oa-548.46.

Caruso, G., Shi Y., Ahmed I. Sayed, Ferraioli A., Piga B., and Mussone L. “Driver’s Behaviour Changes with Different LODs of Road Scenarios.” In European Transport Conference 2020, 2020. https://aetransport.org/past-etc-papers/search-all-etc-conference-papers?abstractId=6804&state=b.

Shi, Y., Xu Y., Ferraioli A., Piga B., Mussone L., and Caruso G. “A Method of Processing Eye-Tracking Data to Study Driver’s Visual Perception in Simulated Driving Scenarios.” In European Transport Conference 2020, 2020. https://aetransport.org/past-etc-papers/search-all-etc-conference-papers?abstractId=6844&state=b.

Shi, Y., Huang W., Cheli F., Bordegoni M., and Caruso G. “Do Autonomous Vehicle Driving Styles Affect User State?: A Preliminary Investigation.” In Volume 1: 39th Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2019. https://doi.org/10.1115/DETC2019-98186.

Shi, Y., Maskani J., Caruso G., and Bordegoni M. “Explore User Behaviour in Semi-Autonomous Driving.” In Proceedings of the Design Society: International Conference on Engineering Design, 1:3871–80, 2019. https://doi.org/10.1017/dsi.2019.394.

Micoli, L. L., Barsanti S. Gonizzi, Caruso G., and Guidi G. “DIGITAL CONTENTS for ENHANCING the COMMUNICATION of MUSEUM EXHIBITION: The PERVIVAL PROJECT.” In ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Vol. 42, 2019. https://doi.org/10.5194/isprs-archives-XLII-2-W9-487-2019.

F. Morosi, I. Carli, G. Caruso, G. Cascini, V. Dhokia, and F. Ben Guefrache. “Analysis of Co-Design Scenarios and Activities for the Development of a Spatial-Augmented Reality Design Platform.” In Proceedings of the DESIGN 2018 15th International Design Conference, 381–92, 2018. https://doi.org/10.21278/idc.2018.0504.

G. Caruso, D. Ruscio, D. Ariansyah, and M. Bordegoni. “Driving Simulator System to Evaluate Driver’s Workload Using ADAS in Different Driving Contexts.” In Volume 1: 37th Computers and Information in Engineering Conference, V001T02A066. ASME, 2017. https://doi.org/10.1115/DETC2017-67850.

D. Ruscio, L. Bascetta, A. Gabrielli, M. Matteucci, D. Ariansyah, M. Bordegoni, G. Caruso, and L. Mussone. “Collection and Comparison of Driver/Passenger Physiologic and Behavioural Data in Simulation and on-Road Driving.” In 2017 5th IEEE International Conference on Models and Technologies for Intelligent Transportation Systems (MT-ITS), 403–8. IEEE, 2017. https://doi.org/10.1109/MTITS.2017.8005705.

F. Molteni, C. Gramigna, S. Canobbio, M. Peverelli, S. Aggujaro, M. Rossini, G. Palumbo, G. Caruso, and M. Covarrubias. “Tele-Rehabilitation Platform for Upper and Lower Limb in Elderly Patients , the HEAD Project .” In E℡EMED 2017, The Ninth International Conference on EHealth, Telemedicine, and Social Medicine, 117–22, 2017. https://www.thinkmind.org/index.php?view=article&articleid=etelemed_2017_11_20_46006.

M. Carulli, A. Vitali, G. Caruso, M. Bordegoni, C. Rizzi, and U. Cugini. “ICT Technology for Innovating the Garment Design Process in Fashion Industry.” In Proceedings of International Conference on Research into Design (ICoRD 2017), 525–35, 2017. https://doi.org/10.1007/978-981-10-3518-0_46.

S. Gonizzi Barsanti, G. Caruso, and G. Guidi. “Virtual Navigation in the Ancient Egyptian Funerary Rituals.” In 2016 22nd International Conference on Virtual System & Multimedia (VSMM), 1–6. IEEE, 2016. https://doi.org/10.1109/VSMM.2016.7863148.

M. Covarrubias R., M. Bordegoni, G. Caruso, and U. Cugini. “Integration of Technology for Olfactory and Gesture Based Interaction for VR Applications.” In Proceedings of TMCE 2016, 1–9, 2016.

M. Covarrubias R., M. Bordegoni, G. Caruso, and U. Cugini. “Reverse Engineering and Augmented Reality Haptic Interface for Shape Design.” In Proceedings of International Conference on Innovative Design and Manufacturing, 1–9, 2016.

M. Covarrubias R., M. Rossini, G. Caruso, G. Samali, C. Giovanzana, F. Molteni, and M. Bordegoni. “Sound Feedback Assessment for Upper Limb Rehabilitation Using a Multimodal Guidance System,” Vol. 9759, 2016. https://doi.org/10.1007/978-3-319-41267-274.

S. Gonizzi Barsanti, G. Caruso, L. L. Micoli, M. Covarrubias Rodriguez, and G. Guidi. “3D Visualization of Cultural Heritage Artefacts with Virtual Reality Devices.” In The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XL-5/W7:165–72, 2015. https://doi.org/10.5194/isprsarchives-XL-5-W7-165-2015.

S. Camere, G. Caruso, M. Bordegoni, C. Di Bartolo, D. Mauri, and E. Pisino. “Form Follows Data: A Method to Support Concept Generation Coupling Experience Design with Motion Capture.” In Proceedings of the 20th International Conference on Engineering Design (ICED15), 135–44, 2015. https://www.designsociety.org/publication/37808/form_follows_data_a_method_to_support_concept_generation_coupling_experience_design_with_motion_capture.

M. Bordegoni, S. Camere, G. Caruso, and U. Cugini. “Body Tracking as a Generative Tool for Experience Design.” In Proceedings of 5th International Conference, DHM 2014, edited by Vincent G. Duffy, 8529:122–33. Springer International Publishing, 2015. https://doi.org/10.1007/978-3-319-07725-3.

G. Caruso, S. Polistina, and M. Bordegoni. “Simple Measurement and Annotation Technique of Real Objects in Augmented Reality Environments.” In Volume 2B: 33rd Computers and Information in Engineering Conference, V02BT02A034. ASME, 2013. https://doi.org/10.1115/DETC2013-12603.

E. Gatti, G. Caruso, M. Bordegoni, and C. Spence. “Can the Feel of the Haptic Interaction Modify a User’s Emotional State?” In In Proceedings of 2013 World Haptics Conference (WHC), 247–52. IEEE, 2013. https://doi.org/10.1109/WHC.2013.6548416.

G. M. Re, G. Caruso, and M. Bordegoni. “Augmented Reality Interactive System to Support Space Planning Activities.” In In Proceedings of Virtual, Augmented and Mixed Reality. Systems and Applications, edited by Randall Shumaker, 8022:291–300. Springer Berlin Heidelberg, 2013. https://doi.org/10.1007/978-3-642-39420-1.

G. M. Re, G. Caruso, P. Belluco, and M. Bordegoni. “Hybrid Technique to Support the Tracking in Unstructured Augmented Reality Environments.” In Volume 2: 32nd Computers and Information in Engineering Conference, Parts A and B, 1361–70. ASME, 2012. https://doi.org/10.1115/DETC2012-70651.

G. Caruso, and M. Bordegoni. “A Novel 3D Interaction Technique Based on the Eye Tracking for Mixed Reality Environments.” In Volume 2: 31st Computers and Information in Engineering Conference, Parts A and B, 1555–63. ASME, 2012. https://doi.org/10.1115/DETC2011-48288.

G. Caruso, E. Gatti, and M. Bordegoni. “Study on the Usability of a Haptic Menu for 3D Interaction.” In In Proceedings of Human-Computer Interaction INTERACT 2011, edited by Pedro Campos, Nicholas Graham, Joaquim Jorge, Nuno Nunes, Philippe Palanque, and Marco Winckler, 6947:186–93. Springer Berlin / Heidelberg, 2011. https://doi.org/10.1007/978-3-642-23771-3_15.

G. Caruso, S. Polistina, and M. Bordegoni. “Collaborative Mixed-Reality Environment to Support the Industrial Product Development.” In In Proceedings of ASME 2011 World Conference on Innovative Virtual Reality, 207–15. ASME, 2011. https://doi.org/10.1115/WINVR2011-5540.

G. Caruso, S. Polistina, M. Bordegoni, and M. Aliverti. “Collaborative Mixed-Reality Platform for the Design Assessment of Cars Interior.” In In Proceedings of Virtual and Mixed Reality - Systems and Applications, edited by Randall Shumaker, 6774:299–308. Springer Berlin / Heidelberg, 2011. https://doi.org/10.1007/978-3-642-22024-1_33.

F. Ferrise, M. Bordegoni, M. Ambrogio, and G. Caruso. “AR Application for Pre-Post Processing in Engineering Analysis for Non-Expert Users.” In In Proceedings of the 3rd International Conference on Research into Design Engineering, 259–66, 2011. http://www.designsociety.org/publication/32362/ar_application_for_pre-post_processing_in_engineering_analysis_for_non-expert_users.

G. Caruso, and P. Belluco. “Robotic Arm for Car Dashboard Layout Assessment in Mixed Reality Environment.” In In Proceedings of 19th International Symposium in Robot and Human Interactive Communication, 62–68. IEEE, 2010. https://doi.org/10.1109/ROMAN.2010.5598685.

G. Caruso, and L. Tedioli. “Mixed Reality Seating Buck System for Ergonomic Evaluation.” In In Proceedings of TMCE 2010 Symposium, 1:511–24, 2010.

G. Caruso, and G. M. Re. “AR-Mote: A Wireless Device for Augmented Reality Environment.” In In Proceedings of 2010 IEEE Symposium on 3D User Interfaces (3DUI), 99–102. IEEE, 2010. https://doi.org/10.1109/3DUI.2010.5444714.

G. Caruso, and G. M. Re. “Interactive Augmented Reality System for Product Design Review.” In In Proceedings of SPIE 7525, The Engineering Reality of Virtual Reality 2010, edited by Ian E. McDowall and Margaret Dolinsky, 7525:75250H. SPIE-The International Society for Optical Engineering., 2010. https://doi.org/10.1117/12.840261.

G. M. Re, G. Caruso, P. Belluco, and M. Bordegoni. “Monitor-Based Tracking System for Wide Augmented Reality Environments.” In In Proceedings of Eurographics Italian Chapter Conference 2010, 153–58, 2010. https://doi.org/10.2312/LocalChapterEvents/ItalChap/ItalianChapConf2010/153-158.

M. Bordegoni, U. Cugini, G. Caruso, and S. Polistina. “The Role of Mixed Prototyping in Product Design Assessment.” In In Proceedings of the 2nd International Conference on Research into Design, 427–34, 2009. https://www.designsociety.org/publication/32309/the_role_of_mixed_prototyping_in_product_design_assessment.

G. Caruso, and U. Cugini. “Augmented Reality Video See-through HMD Oriented to Product Design Assessment.” In In Proceedings of International Conference on Virtual and Mixed Reality (VMR), 532–41. Springer Berlin / Heidelberg, 2009. https://doi.org/10.1007/978-3-642-02771-0_59.

M. Bordegoni, G. Caruso, and F. Ferrise. “Mixed-Reality Environment Based on Haptic Control System for a Tractor Cabin Design Review.” In In Proceedings of CIRP Design Conference, 1–6, 2008.

M. Bordegoni, U. Cugini, G. Caruso, and S. Polistina. “Mixed Prototyping for Rapid Design Review of Information Appliances.” In In Proceedings of IDMME - Virtual Concept 2008, 2008.

M. Bordegoni, F. Ferrise, M. Ambrogio, G. Caruso, F. Bruno, and F. Caruso. “Environment Based on Augmented Reality and Interactive Simulation for Product Design Review.” In In Proceedings of Eurographics Italian Chapter Conference 2008, 27–34, 2008. https://doi.org/10.2312/LocalChapterEvents/ItalChap/ItalianChapConf2008/027-034.

Nabi, F. Abed El, G. Caruso, I. Carli, and F. Morosi. “SPARK Platform - V2,” 2018. https://spark-project.net/node/151.html.

Garza, I. Garcia, N. Patel, G. Caruso, I. Carli, F. Morosi, and A. Pusch. “SPARK Platform - V1,” 2017. https://spark-project.net/node/151.html.

Caruso, G., D. De Lucia, N. Becattini, F. Noël, A. Pusch, P. Martens, I. Garcia Garza, and L. Dutreve. “Technologies and Techniques - State of the Art Updates,” 2016. https://spark-project.net/node/151.html.

Caruso, G., I. Carli, F. Noël, M. Trlin, I. Garzia Garza, and L. Dutreve. “SPARK Modules Prototype,” 2016. https://spark-project.net/node/151.html.

Garza, I. Garcia, L. Dutreve, G. Caruso, I. Carli, F. Morosi, F. Noel, and M. Trlin. “Technologies and Techniques to Be Embedded in the SPARK Platform,” 2016. https://spark-project.net/node/151.html.

Noël, F., P. Maigrot, M. Trlin, G. Caruso, and I. Garcia Garza. “Definition of the Process to Evaluate SPARK Modules Performance,” 2016. https://spark-project.net/node/151.html.